260B02 ロードセル ICP| PCB製品・検索見積りサイト東陽テクニカ

Model: 260B02
Triax force sensor, ICP®, 1000 lb (Fx,y,z), 2.5 mV/lb (Fz), 5 mV/lb (Fx,y), ground isolated

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±20 %) (Z Axis)	0.56 mV/N	[3]
Sensitivity (±20 %) (X or Y Axis)	1.12 mV/N	[3]
Measurement Range (Z Axis)	4.45 kN
Measurement Range (X or Y Axis)	4.45 kN
Maximum Force (Z Axis)	5.87 kN
Maximum Force (X or Y Axis)	4.89 kN
Maximum Moment (Z Axis)	78.6 Nm
Maximum Moment (X or Y Axis)	130.2 Nm
Broadband Resolution (Z axis)	0.0222 N-rms	[2]
Broadband Resolution (X or Y axis)	0.0133 N-rms	[2]
Low Frequency Response (-5 %) (Z-Axis)	0.01 Hz
Low Frequency Response (-5 %) (X or Y Axis)	0.001 Hz
Non-Linearity	≤1 % FS	[1]
Cross Talk (between X and Y Axis)	±3 %
Cross Talk (between (X or Y Axis) and Z Axis)	±5 %
Environmental
Temperature Range	-54 to +121 °C
Electrical
Full Scale Output (Z Direction)	±2.5 VDC
Full Scale Output (X and Y Direction)	±5 VDC
Discharge Time Constant (Z Axis)	≥50 sec
Discharge Time Constant (X or Y Axis)	≥500 sec
Excitation Voltage (all channels)	20 to 30 VDC
Constant Current Excitation (all channels)	2 to 20 mA
Output Impedance	≤100 Ohm
Output Bias Voltage	8 to 14 VDC
Spectral Noise (1 Hz) (X & Y)	.0044 N√Hz
Spectral Noise (10 Hz) (X & Y)	0.00133 N√Hz
Spectral Noise (100 Hz) (X & Y)	0.000356 N√Hz
Spectral Noise (1,000 Hz) (X & Y)	0.000089 N√Hz
Spectral Noise (1 Hz) (Z)	0.0089 N√Hz
Spectral Noise (10 Hz) (Z)	0.00222 N√Hz
Spectral Noise (100 Hz) (Z)	0.00089 N√Hz
Spectral Noise (1000 Hz) (Z)	0.000222 N√Hz
Output Polarity	Positive
Electrical Isolation	≥1000000 Ohm
Physical
Preload	44.48 kN	[4]
Stiffness (X or Y Axis)	602 N/µm	[2] [5]
Stiffness (Z Axis)	2,886 N/µm	[2] [5]
Stiffness (RX or RY Axis)	1.4E5 N*m/radian	[2] [5]
Stiffness (RZ Axis)	1.7E5 N*m/radian	[2] [5]
Coupled Stiffness	1.8 N*m/µm	[2] [5]
Weight	43.79 gm
Housing Material	Stainless Steel
Sealing	Hermetic
Electrical Connector	4-Pin
Electrical Connection Position	Side

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Sensitivities are dependent upon supplied bolt.
[4] Preload should be at least 10 times the X and Y operating range used.
[5] See PCB White Paper WPL_88_1121 for details.
[6] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

081A74	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/5-40)
082M12	ｱﾝﾁﾌﾘｸｼｮﾝﾜｯｼｬｰ
083A13	ﾊﾟｲﾛｯﾄﾌﾞｯｼﾝｸﾞ
M081A74

Optional Versions:

( W ) Water Resistant Cable

Electrical Connection Position

Side

■ Documents & Downloads

Product Documents

● Product Manual