102M205 圧力センサ ICP| PCBセンサ・オンラインストア東陽テクニカ

Model: 102M205
Pressure Sensor ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd, accel. comp., ground isolated

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Measurement Range (for ±5V output)	689.5 kPa
Useful Overrange (for ± 10V output)	1379 kPa	[3]
Sensitivity (±10 mV/psi)	7.25 mV/kPa
Maximum Pressure	3 448 kPa
Resolution	0.0028 kPa	[2]
Resonant Frequency	≥250 kHz
Rise Time	≤2 µ sec
Low Frequency Response (-5 %)	0.50 Hz
Non-Linearity	≤1 % FS	[1]
Environmental
Acceleration Sensitivity	0 0014 kPa/(m/s²)	[2]
Temperature Range (Operating)	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤.054 %/°C
Maximum Flash Temperature	1 649 °C
Maximum Vibration	19600 m/s² pk
Maximum Shock	196000 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive
Discharge Time Constant (at room temp)	≥1 sec
Excitation Voltage	20 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Bias Voltage	8 to 14 VDC
Physical
Sensing Element	Quartz
Housing Material	17-4 Stainless Steel
Diaphragm	316L Stainless Steel	[4]
Sealing	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack
Weight	11 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Diaphragm with ablative coating.
[5] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

065A44	ｼｰﾙﾘﾝｸﾞ

選択アクセサリ

PCS-QC	校正証明書

Optional Versions:

( M ) Metric Mount

( W ) Water Resistant Cable

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet