東陽テクニカ PCB製品・検索見積りサイト
PCB製品・検索見積りサイト
PCB製品・検索見積りサイト
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はそのまま見積請求していただけますのでぜひご活用ください。

キャンペーン
東陽テクニカ
カテゴリから検索

Model: 103B01
Acoustic ICP® pressure sensor, 3 psi, 1500 mV/psi, integral 2-wire cable, accel. comp.
ケーブル一体型
■ Specifications
Performance
Measurement Range 180.3 dB
Useful Overrange 186.3 dB [3]
Sensitivity (±15 %) 217.5 mV/kPa
Maximum Pressure 1724 kPa
Resolution 77 dB [2]
Resonant Frequency ≥13 kHz
Rise Time ≤25 µ sec
Low Frequency Response (-5 %) 5 Hz
Non-Linearity ≤2.0 % FS [1]
Environmental
Acceleration Sensitivity 0.0035 kPa/(m/s²) [2]
Temperature Range (Operating) -73 to 121 °C
Temperature Coefficient of Sensitivity ≤0.36 %/°C
Maximum Flash Temperature 538 °C
Maximum Shock 9807 m/s² pk
Maximum Vibration 9807 m/s² pk
Electrical
Discharge Time Constant 0.1 to 2.0 sec
Excitation Voltage 20 to 30 VDC
Constant Current Excitation 2 to 20 mA
Output Impedance ≤100 Ohm
Output Bias Voltage 7 to 13 VDC
Physical
Sensing Element Ceramic
Housing Material Stainless Steel
Diaphragm 316L Stainless Steel
Sealing Epoxy
Electrical Connector Integral Cable
Cable Termination Pigtail Ends
Weight 3.260 gm
Cable Type 32 AWG stranded wires
Cable Length 38.1 cm
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories:
標準付属アクセサリ
061A04
065A66
選択アクセサリ
PCS-QC 校正証明書
Optional Versions:
( M ) Metric Mount
Accessories:
M061A04 Clamp

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。