216B | PCB製品・検索見積りサイト東陽テクニカ

Model: 216B
Force ring, 80k lb comp., 18 pC/lb, charge output

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±15 %)	4047 pC/kN
Measurement Range (Compression)	≤355.86 kN
Maximum Static Force (Compression)	400.32 kN
Upper Frequency Limit	40 kHz	[2] [3]
Non-Linearity	≤1.25 % FS	[1]
Environmental
Temperature Range	-73 to +204 °C
Temperature Coefficient of Sensitivity	≤0.054 %/°C
Electrical
Capacitance	80 pF	[4]
Insulation Resistance	≥1E12
Output Polarity (Compression)	Negative
Physical
Preload	71.172 kN
Stiffness	13 kN/µm	[4]
Size - Diameter	52.9 mm
Size - Height	15 mm
Size - Bolt Diameter	26 mm
Size - ID (Hole Diameter)	26.04 mm
Size - OD (Sensor)	52 mm
Size - Sensing Surface	44.5 mm
Weight	155 gm
Housing Material	Stainless Steel
Sealing	Hermetic
Electrical Connector	10-32 Coaxial Jack
Electrical Connection Position	Side

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.

Accessories:

標準付属アクセサリ

080A82	潤滑剤
081A16	マウントスタッド
082B06	ｱﾝﾁﾌﾘｸｼｮﾝﾜｯｼｬｰ
083B06	パイロットブッシング

推奨アクセサリ

003A10
003A20
003A30
003C10	ﾃﾌﾛﾝ青ﾛｰﾉｲｽﾞｹｰﾌﾞﾙ10FT(10-32/BNC)
003C20	ﾃﾌﾛﾝ青ﾛｰﾉｲｽﾞｹｰﾌﾞﾙ20FT(10-32/BNC)
003C30	ﾃﾌﾛﾝ青ﾛｰﾉｲｽﾞｹｰﾌﾞﾙ30FT(10-32/BNC)

選択アクセサリ

HCS-QC	校正証明書

Optional Versions:

( M ) Metric Mount

Accessories:

M083B06	Pilot Bushing
M081A16	Mounting Stud, M22 x 2.00 x 1.900, BeCu
082B06	Anti-Friction Washer
080A82	Accessory for Force - Torque Division Product

( P ) Positive Output Polarity

( W ) Water Resistant Cable

Electrical Connection Position	Side
Electrical Connector	Molded Integral Cable

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet