東陽テクニカ PCB製品・検索見積りサイト
PCB製品・検索見積りサイト
PCB製品・検索見積りサイト
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はそのまま見積請求していただけますのでぜひご活用ください。

キャンペーン
東陽テクニカ
カテゴリから検索

Model: 260B03
Triax force sensor, ICP®, 10k lb (Fz), 4k lb (Fx,y), 0.25 mV/lb (z), 1.25 mV/lb (x, y), ground isolated

■ Specifications
Performance
Sensitivity (±20 %) (Z Axis) 0.06 mV/N [3]
Sensitivity (±20 %) (X or Y Axis) 0.28 mV/N [3]
Measurement Range (Z Axis) 44.48 kN
Measurement Range (X or Y Axis) 17.79 kN
Maximum Force (Z Axis) 48.93 kN
Maximum Force (X or Y Axis) 19.57 kN
Maximum Moment (Z Axis) 508.4 Nm
Maximum Moment (X or Y Axis) 637.2 Nm
Broadband Resolution (Z Axis) 0.222 N-rms [2]
Broadband Resolution (X or Y Axis) 0.04 N-rms [2]
Low Frequency Response (-5 %) (Z-Axis) 0.01 Hz
Low Frequency Response (-5 %) (X or Y Axis) 0.001 Hz
Non-Linearity ≤1 % FS [1]
Cross Talk (between X and Y Axis) ±3 %
Cross Talk (between (X or Y Axis) and Z Axis) ±5 %
Environmental
Temperature Range -54 to +121 °C
Electrical
Full Scale Output (Z Direction) ±2.5 VDC
Full Scale Output (X and Y Direction) ±5 VDC
Discharge Time Constant (Z Axis) ≥50 sec
Discharge Time Constant (X or Y Axis) ≥500 sec
Excitation Voltage (all channels) 20 to 30 VDC
Constant Current Excitation (all channels) 2 to 20 mA
Output Impedance ≤100 Ohm
Output Bias Voltage 8 to 14 VDC
Spectral Noise (1 Hz) (X & Y) 0.0134 N/√Hz
Spectral Noise (10 Hz) (X & Y) 0.00445 N/√Hz
Spectral Noise (100 Hz) (X & Y) 0.00178 N/√Hz
Spectral Noise (1000 Hz) (X & Y) 0.000445 N/√Hz
Spectral Noise (1 Hz) (Z) 0.089 N/√Hz
Spectral Noise (10 Hz) (Z) 0.0222 N/√Hz
Spectral Noise (100 Hz) (Z) 0.0089 N/√Hz
Spectral Noise (1000 Hz) (Z) 0.00222 N/√Hz
Output Polarity Positive
Electrical Isolation ≥100000000 Ohm
Physical
Preload 178 kN [4]
Stiffness (X or Y Axis) 1215 N/µm [2] [5]
Stiffness (Z Axis) 6645 N/µm [2] [5]
Stiffness (RX or RY Axis) 1.3E6 N*m/radian [2] [5]
Stiffness (RZ Axis) 1.4E6 N*m/radian [2] [5]
Coupled Stiffness 2.7 N*m/µm [2] [5]
Weight 274 gm
Housing Material Stainless Steel
Sealing Hermetic
Electrical Connector 4-Pin
Electrical Connection Position Side
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Sensitivities are dependent upon supplied bolt.
[4] Preload should be at least 10 times the X and Y operating range used.
[5] See PCB White Paper WPL_88_1121 for details.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
標準付属アクセサリ
081A71 マウントスタッド
082B06 アンチフリクションワッシャー
083A11 パイロットブッシング
M081A71
Optional Versions:
( W ) Water Resistant Cable
Electrical Connection Position Side

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。