356A66 | PCBセンサ・オンラインストア東陽テクニカ

Model: 356A66
Triaxial, ceramic shear ICP® accel., 10 mV/g, 2 to 4 kHz, 14 mm cube size, w/built-in filter

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±10 %)	1.02 mV/(m/s²)
Measurement Range	±4900 m/s² pk
Frequency Range (±5 %)	2 to 4000 Hz	[3] [4]
Resonant Frequency	≥35 kHz
Filter Type	single pole
Electrical Filter Roll-off	6 dB/octave	[2]
Broadband Resolution (1)	0.02 m/s² rms	[2]
Electrical Filter Cutoff Frequency	16 kHz	[2]
Non-Linearity	≤±1 %	[1]
Transverse Sensitivity	≤5 %
Environmental
Overload Limit (Shock)	±68600 m/s² pk
Temperature Range (Operating)	-54 to +121 °C	[5]
Temperature Response	See Graph %/°F	[2]
Base Strain Sensitivity	0.01 (m/s²)/µε	[2]
Electrical
Excitation Voltage	22 to 30 VDC	[6]
Constant Current Excitation	2 to 20 mA
Output Impedance	≤200 Ohm
Output Bias Voltage	7 to 15 VDC	[7]
Discharge Time Constant	0.1 to 1.0 sec
Settling Time (within 10% of bias)	<3 sec
Spectral Noise (1 Hz)	4415 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	981 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	245 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	196 (µm/sec²)/√Hz	[2]
Physical
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Titanium
Sealing	Hermetic
Size - Height	14.0 mm
Size - Length	20.3 mm
Size - Width	14.0 mm
Weight	9.0 gm	[2]
Electrical Connector	1/4-28 4-Pin
Electrical Connection Position	Side
Mounting Thread	10-32 Female
Mounting Torque	113 to 225 N-cm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Upper frequency response is ± 500 Hz from the specified value.
[4] X-axis frequency response is limited due to mounting method.
[5] 250° F to 325° F data valid with HT option only.
[6] Full range requires adequate excitation voltage.
[7] TEDS option adds 1.0 VDC to bias voltage.
[8] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

080A109	ﾍﾟﾄﾛﾜｯｸｽ(試供品 1個入)
080A12	接着ﾏｳﾝﾄﾍﾞｰｽ
081B05	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/10-32)
ACS-1T	校正データ
M081B05	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/M6x0.75)

推奨アクセサリ

034G10	ｹｰﾌﾞﾙ4線10FT(4PIN/BNC)
034G20	ｹｰﾌﾞﾙ4線20FT(4PIN/BNC)
034G30	ｹｰﾌﾞﾙ4線30FT(4PIN/BNC)
080A27	ﾏｸﾞﾈｯﾄﾍﾞｰｽ
482C05	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
482C15	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ｹﾞｲﾝ付）
482C16	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(可変ｹﾞｲﾝ付）

選択アクセサリ

039A10	取外しﾂｰﾙ(14mm)
080A24	ﾍﾟﾄﾛﾜｯｸｽ(4個入)
ACS-QC	校正機器リスト

Optional Versions:

( HT ) High temperature, extends normal operation temperatures

( TLA ) TEDS LMS International - Free Format

( TLB ) TEDS LMS International - Automotive Format

( TLC ) TEDS LMS International - Aeronautical Format

( TLD ) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet