357C72 | PCBセンサ・オンラインストア東陽テクニカ

Model: 357C72
Charge output accel., 50 pC/g, 500 g, to 2.5 kHz, 2-pin connector, 3-hole mount, to +900 F

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±5 %)	5.1 pC/(m/s²)
Measurement Range	±4905 m/s² pk
Frequency Range (±5 %)	2.5 kHz	[3]
Resonant Frequency	≥13 kHz
Non-Linearity	≤1 %	[1]
Transverse Sensitivity	≤5 %	[2]
Environmental
Overload Limit (Shock)	±19620 m/s² pk
Temperature Range	-54 to +482 °C
Temperature Range	-54 to +482 °C
Temperature Response	See Graph %/°F	[4]
Base Strain Sensitivity	0.32 (m/s²)/µε	[4]
Radiation Exposure Limit (Integrated Neutron Flux)	1E10 N/cm²
Radiation Exposure Limit (Integrated Gamma Flux)	1 E8 rad
Electrical
Capacitance (Pin to Pin)	990 pF	[4]
Capacitance (Pin to Case)	26 pF	[4]
Capacitance (Unbalance Between Pins)	≤2 pF
Insulation Resistance (Pin to Case 70°F)	>100000000 Ohm	[4]
Insulation Resistance (Pin to Pin 70°F)	>1000000000 Ohm
Insulation Resistance (Pin to Pin 900°F)	>100 kohm
Physical
Sensing Element	Ceramic
Sealing	Hermetic
Size - Height	35.6 mm
Size - Diameter	19 mm
Weight	90 gm	[4]
Electrical Connector	7/16-27 2-Pin
Electrical Connection Position	Side
Mounting	Through Holes (3)

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Transverse sensitivity is typically ≤ 3%.
[3] Low frequency response is determined by external signal conditioning electronics.
[4] Typical.
[5] See PCB Declaration of Conformance PS081 for details.

Accessories:

標準付属アクセサリ

081A99	絶縁用キャップ
ACS-1	校正データ

推奨アクセサリ

013GN010GN
442E51
442E52.442E53
482C54	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ICP/ﾁｬｰｼﾞ型対応)

選択アクセサリ

ACS-QC	校正機器リスト

Optional Versions:

( EX ) Hazardous Area Approval- contact factory for specific approvals

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet