3991B1160KG | PCBセンサ・オンラインストア東陽テクニカ

Model: 3991B1160KG
MEMS Shock Accelerometer, 60 Kg, thru hole mount, 096 integral cable

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±50 %) (at 10 VDC excitation)	0.0003 mV/(m/s²)	[2]
Sensitivity	0.00003 mV/V/(m/s²)	[3]
Measurement Range	±0 to 588400 m/s² pk
Frequency Range (1 dB)	0 to 20000 Hz
Resonant Frequency	>120 kHz
Damping Ratio	2 % Critical	[1]
Non-Linearity (per 10,000 g (98,100 m/s²))	≤1 %
Transverse Sensitivity	≤3 %
Environmental
Overload Limit (Shock)	±980665 m/s² pk	[5]
Overload Limit (Mechanical Stops)	≥782534 m/s² pk
Temperature Range (Operating)	-54 to 121 °C
Temperature Coefficient of Sensitivity	-0.20 %/°C	[1]
Zero g Offset Temperature Shift	±10 mV	[4]
Base Strain Sensitivity	2.94 (m/s²)/µε	[1]
Electrical
Excitation Voltage (Maximum)	15.0 VDC
Current Consumption	<3 mA
Input Resistance (±2000 Ohm)	6000 Ohm	[1] [2]
Output Resistance (±2000 Ohm)	6000 Ohm	[1] [2]
Offset Voltage	±40 mVDC	[2]
Settling Time	0.01 sec	[6]
Electrical Isolation (Case)	≥10000000 Ohm	[7]
Physical
Sensing Element	Piezoresistive MEMS
Sensing Geometry	Full Active
Housing Material	Titanium
Sealing	Epoxy
Size - Height	3.05 mm
Size - Length	14.22 mm
Size - Width	7.11 mm
Weight (without cable)	1.28 gm	[1]
Electrical Connector	Integral Cable
Electrical Connection Position	Side
Cable Type	096 4-cond silicone jacket
Cable Termination	Pigtail Ends
Cable Length	3.05 m
Mounting	Through Holes (2)

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[7] Individually tested to ensure compliance with specified value.
[8] See PCB Declaration of Conformance PS165 for details.

Accessories:

標準付属アクセサリ

081A110
ACS-62	校正データ

Optional Versions:

No optional versions

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet