M109D12 | PCBセンサ・オンラインストア東陽テクニカ

Model: M109D12
High pressure ICP® ballistic pressure sensor, 100k psi, 0.07 mV/psi, accel. comp, metric mount

■ Specifications

Performance
Measurement Range (for ± 7V output)	690000 kPa
Sensitivity (±15 %)	0.010 mV/kPa
Maximum Pressure	862000 kPa
Resolution	13.8 kPa	[2]
Resonant Frequency	≥400 kHz
Rise Time	≤2.0 µ sec
Non-Linearity	≤2.0 % FS	[1]
Environmental
Acceleration Sensitivity	0.014 kPa/(m/s²)	[2]
Temperature Range (Operating)	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.126 %/°C
Maximum Flash Temperature	1650 °C
Maximum Vibration	19600 m/s² pk
Maximum Shock	490000 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive
Discharge Time Constant (at room temp)	>1000 sec
Excitation Voltage	20 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	≤100 Ohm
Output Bias Voltage	8 to 14 VDC
Physical
Sensing Geometry	Compression
Sensing Element	Quartz
Housing Material	C-300
Diaphragm	C-300
Sealing	Epoxy
Electrical Connector	10-32 Coaxial Jack
Weight	17 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

065A06	ｼｰﾙﾘﾝｸﾞ

Optional Versions:

( H ) Hermetic Seal

( M ) Metric Mount

( W ) Water Resistant Cable

■ Documents & Downloads

Product Documents

本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。