M641B01 | PCBセンサ・オンラインストア東陽テクニカ

Model: M641B01
Platinum Stock Products; Industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Measurement Range	0.0 to 25.4 mm/s rms	[3]
Output	4-20 mA
Frequency Range (±10 %)	10 to 1 kHz	[1] [2]
Broadband Resolution	0.13 mm/s rms	[4]
Non-Linearity	±1 %
Environmental
Temperature Range	-40 to 85 °C
Enclosure Rating	IP68
Electrical
Excitation Voltage	12 to 30 VDC
Settling Time (within 2% of value)	<15 sec
Electrical Isolation (Case)	>100000000 Ohm
Physical
Size - Hex	25.4 mm
Size - Height	66 mm
Weight	131 gm
Mounting Thread	No Metric Equivalent
Mounting Torque	4 to 7 Nm
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Stainless Steel
Sealing	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015
Electrical Connection Position	Top
Electrical Connections (Pin A)	4-20 mA Pos (+)
Electrical Connections (Pin B)	4-20 mA Neg (-)

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] 1Hz = 60 cpm (cycles per minute).
[2] Current will fluctuate at frequencies below 5 Hz.
[3] Conversion Factor 1 in/sec = 0.0254 m/sec.
[4] Typical.
[5] See PCB Declaration of Conformance PS039 or PS053 for details.

Accessories:

標準付属アクセサリ

M081A61	ﾏｳﾝﾄｽﾀｯﾄﾞ(1/4-28/M6x1)
ICS-4	校正データ

Optional Versions:

( EX ) Hazardous Area Approval- contact factory for specific approvals

( M ) Metric Mount

( RV ) Buffered Analog Signal Output - 100 mV/g (±20%)

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet